Timing Q2 - Reply to Topic
Have an account? Register

Forgot your password?

Forgot your username?

 

Reply to Thread

Post a reply to the thread: Timing Q2

Your Message

 

Send Trackbacks to (Separate multiple URLs with spaces)

You may choose an icon for your message from this list

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Where you live, Town\City\County etc.

Please enter your full name
This field cannot be edited once it has been completed other than via contacting the site admin. Please make sure the information is correct first time.

Log-in

Additional Options

  • Will turn www.example.com into [URL]http://www.example.com[/URL].

Topic Review (Newest First)

  • 26-10-2009, 21:58
    vince-305
    Kev i was going to suggest giving Steve cross a call who might of been able to help but i couldnt find his number and i know its on here somewhere

    it would appear its sorted now

    Typical, late for everything me
  • 26-10-2009, 21:42
    kapri
    He does like to keep me occupied !
  • 26-10-2009, 21:04
    pompeypaul
    its antons kev.........gonna be unusual
  • 26-10-2009, 18:40
    kapri
    Added 4 degrees (14btdc toa stock 12 ) and problem seems sorted. Weird thing is that the timing mark snow agree with or without dialback ...go figure .
  • 26-10-2009, 09:35
    kapri
    I know the mech advance is working but haven't checked the vacuum, made the mistake of assuming it must be right because it's new...I should know better.
  • 26-10-2009, 01:18
    scooder
    Glowing header pipes normaly means late firing if my memory servs me right Kev. The advance is working init?
    Martin.
  • 24-10-2009, 15:51
    kapri

    Timing Q2

    Bit of along one ( ooerr ) as the background may be relevant .

    We've just rebuilt totally Antons Oddfire Buick V6 .

    When we redid this engine it was fitted with an evenfire timing cover which has a removeable timing number bracket. The original oddfire cover has a cast in timing mark. The Pat Ganahl book says there is 18 degrees difference between the two marks.

    With the heads still off we set number 1 piston at TDC of rock ,ie when it's centre of it's null travel at the top of the stroke. We had a spare bolt on timing mark so modified this so that it sat at 0tdc mark but this only actually moved it 10 degrees from it's old position. So if anything we are conservative if we haven't got it right ie retarded not advanced

    I aligned the 3 firing triggers inside the HEI with the static timing set at TDC and we started the motor .One of the headers was glowing red ,so stopped it and advanced it manually to 10 BTDC ( stock Oddfire timing is 12 BTDC ).It fired and the glowing went away .

    However I then checked the timing using a dial back light and using the established TDC mark it showed only 2 BTDC ? I then advanced it back to 10 BTDC (don't want to put full adance plus more in yet on a fresh engine.)

    After a run out in the dark he came back to see the two rear pipes glowing red .Just been up there to check the timing (and after aconversation with Paul Nichols this morning ) I dialed the baseline just using the non dial back mode which showed up as 10BTDC ( using OUR established marks ) but the dial back to TDC showed it at only 4 BTDC ?

    What's happening ? The Holley 390 is set up with mixture screws at 1 3/4 turns to give best vacuum ,plugs are looking off white to just starting to sandy brown.

    We've now pulled the home made baffles in his headers /sidepipe as the internal outlet is only the same size as his primary pipes so I'm thinking that this may be restricting the exhaust gas and causing a heat build up in the ( rearmost ) pipes ?

    We can't take it for a run until it gets dark and need to worry about puddles mixed witha glowing hot stainless exhaust manifold.

    Any input on :-

    1) Timing problem
    2) reason for glowing header pipe (bearing in mind the possible timing issue)

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •