Good morning to all my fellow hot rodders. I've been having some problems with my torino that I imported last may. It's running a 429 with a c6 tranny. I've just replaced the torque convertor after a possible failure issue. Now I've put it all back together and now it really doesn't work properly. Have a clattering noise now when just turning the back wheels while up in the air. The symptoms are different from the original problem so I don't know if what I have done has made it worse. I'm pretty stuck now to know what to do so any advise would be great. If there's anyone out there that has knowledge and is close to banbury in oxfordshire would great to be able to show you the issue. But any advise would be great.