2 post lift wiring help

[russ6120]

I’ve bought and bolted down my new 3 post lift and the wiring instructions are feckin crap....to be honest the instructions in general aren’t great.
All the wiring part says is to connect as per figure which is a fuzzy black and white photo 1 1/2 inches high.
Can somebody e please tell exactly what goes where from the photo of the control box

It’s should be power in, power to the motor and a limit switch


I think the photo has come out sideways just to make it harder

[brading]

Think it might help if said what make and model.

[rockhouse]

and weather its a 2 or 4 post

[boblester40]

live and neutral and earth to the terminals blue and black and green yellow at the the bottom of the box , thats your power in

T1 and T3 to the motor from the contactor , earth wire from motor in the same earth as before if possible

[russ6120]

live and neutral and earth to the terminals blue and black and green yellow at the the bottom of the box , thats your power in

T1 and T3 to the motor from the contactor , earth wire from motor in the same earth as before if possible

Thank you. All sorted now