Rods 'n' Sods - UK Hot Rod & Street Rod Forums banner

460

  1. Stuff - FOR SALE
    460/429 Ford Lunati Voodoo Cam & Lifters hydraulic flat tappet hot street cam, used for around 1200 miles before swapping to a solid Flat tappet race cam, very strong torque and lopey idle. Lifters are matched and in order for fitting. £80 firm including courier to mainland UK. Highlands and...
  2. Stuff - FOR SALE
    460 Ford Edelbrock Performer RPM Heads 75cc chambers, freshly removed from engine, have covered 2000 miles since new over the last two years, ports cleaned up to remove casting edges and lines, fitted with comp cams 3/8 pushrod guide plates, still like new other than a light dusting of carbon in...
  3. Stuff - FOR SALE
    460 Ford Aluminium Roller Rocker Arms Comp Cams, have covered 1200 miles in a mild big block, also fit 429/370 and the cleveland /351m/400, poly locks included, £100 including courier to mainland UK postcodes. Also Scorpion Race Series roller rockers for the same engine types, have been in...
  4. Stuff - FOR SALE
    460 Ford Aluminium Roller Rocker Arms Comp Cams, have covered 1200 miles in a mild 460, also fit 429/370 and the cleveland /351m/400. Pushrod reliefs have been enlarged by 1mm to give clearance for use with 3/8 pushrods. Oiled up and ready to go, poly locks included. £120 including courier to...
  5. Stuff - FOR SALE
    460 Ford Lunati Hot Street / Strip Hydraulic Flat Tappet Cam & lifters, 9 months old and covered less than 1500 miles, Part No 10340505 with matched lifters in order in box. Duration 245 / 255 @ 0.050", Lift 0.616" / 0.626", proved a little too racey for my application with 2.83 gears. Needs...
  6. Stuff - FOR SALE
    MAHLE Big Block Ford 557/533ci Forged Stroker Piston & Ring Set, Brand New in box supplied by Summit Racing, for use with 4.5" stroke crank and 6.7" rods for 557ci, or 4.3" stroke with 6.8" rods for 533ci. 38cc dish, 4.44" bore (+0.080).Compression with 74cc heads is 10.3:1, with 95cc heads is...
  7. Stuff - FOR SALE
    Ford 460 Hypereutectic Flat Top Pistons KB / Silvolite With Moly Rings +0.060". Brand new in box, the full description from where I bought them from is here http://www.summitracing.com/int/parts/uem-3191h-060/overview/ Hastings +0.060" ring set also included, Moly top rings, also brand new in...
  8. Stuff - FOR SALE
    Ford Big Block 460 429 C9VE 1969 Rebuilt Cylinder Heads, same as D0VE heads, 75cc high compression chambers, have freshly removed them from my 1969 460, heads are rebuilt 600 miles ago as was engine, with new Melling valves, Edelbrock valve springs, Manley 3/8 pushrod guide plates, ARP 7/16...
  9. Stuff - WANTED
    Hi all, I am after a set of roller rockers for a 460 big block ford, new or used. Thanks Chris
  10. Stuff - FOR SALE
    Hi , Selling a 9 position multi index timing chain set for a BBF 460 / 429, which I've always thought was a Ford Racing item although I can't be 100% sure as I can't seem to cross reference the numbers. Had it on the shelf for ages, from an old unfinished project. I bought it after it had done...
  11. Stuff - FOR SALE
    Ford 460 complete and sold for rebuild. £550.
  12. Stuff - FOR SALE
    i bought these for my 72 ranchero but they dont fit!! i paid £300 for them last weekend just trying to get my money back. cheers dan
  13. Stuff - WANTED
    I have just bought a 460 big block, but the standard pistons already fitted have dishes in big enough to swim in. Does anyone have standard bore 460 pistons? I can bore out, if needs be... Cheers.
  14. Stuff - FOR SALE
    TRW Speed pro 460 pistons, +0.030" 12cc inverted dome, give 10.3:1 wil 95cc heads, 14:1 with 75cc heads,used, (with stock length stroke and rods) no longer needed as I'm going turbo £75 plus the ride Howards Ally con rods for the above pistons, 8 off, offers 0778 3000 949
  15. Stuff - FOR SALE
    I have a couple of complete 455 buicks for sale. come out of running cars, but i woould recommend them being checked out hence price, Olds 455 engine as above £550 Ford 460 again as above £500 way to heavy to post cheers __________________ Adrian
  16. The Garage
    Right, I've finally got off my fat a*se and taken some pics of the pile of bits that I generated over xmas. What we have here is the new engine that is destined for my minor, as I had to sell the viper motor due to lack of work, unemployment etc etc. What we have in the pics is a 460 BBF out of...
  17. Stuff - FOR SALE
    I WILL DEAL SMALL CHEVY TUNING BITS AND A MANUAL BOX For sale a new pair of 460 procomp aluminum heads, fully assembled £1500 a new 460 gear drive £150 call me on 07718 339011, neil. sold the 351c bits but can't edit the title, sorry.
  18. Stuff - FOR SALE
    engine, box, edelbrock inlet, all ancillaries, needs a carb then its complete all working when i drove it home (lincoln continental) took it out and stored it under my bench,,,,,10 years ago !! £850 have a new mallory unilite distributor £200 will fit 460 429 + 351 cleveland First come...
  19. Freebies
    Sorry SOLD SOLD SOLD Shortly after I placed the add,didn't have time to update. I have a 460 Ford V8 big block, +060 on the bores and -010 on the Crank, water damage to a couple of the bores ,pistons stuck in ! Either good for a +080 stroker rebuild or just parts or even a mock up engine ! No...
  20. Stuff - WANTED
    Anyone got a 460 BBF EFI kicking about, complete, or parts. The cheaper the better, free would be nice. After manifold, inlet, injectors, rails, loom, everything basically. Would consider complete motor if cheap enough. There must be some bits out there somewhere........ Jeff
Top