My 56 buick special clutch has issues i read on home town buick tech data the plate should be 10.5 inches but it has an 11 inch in place it was juddering and the reason was its catching the springs on the flywheel bolts
Can anyone tell me where to get the correct sized plate ?
Hi guys, I have a '97 Chevy S10 with a manual 4.3 V6, which had a new driveshaft and clutch plate put in last year (apparently). I've only had it 8 months, but in the last few weeks has started making a fairly quiet/subtle crunching kind of sound (sounds like somebody is stirring a bowl full of...
took the truck for its mot today(it passed)and on the way back i had difficulty in selecting gears,its got a new clutch fitted and its hydraulic so i've got no adjustment,im certain i bled it through ok and it was fine on the way there(25 miles) its definatley dragging and gets marginally better...
Bought in error, I needed a 10.5", this is an 11" plate. Is in perfectly serviceable condition, all fingers are OK.
Friction plate surface is a little rusty but will clean up fine with a wire brush
Located in Cambridge. Could post at buyers cost
put a new clutch on a lt77 5speed box
replaced flywheel spigot bush
everything apart from release bearing carrier
and fork & when sitting ticking over its
rattling its tits off press clutch pedal & it dissapears
same problem before changing clutch etc
will the problem be the bearing carrier worn...
Going through the garage over the weekend looking for something else sand came across this.
Brand new Zoom clutch kit for SBC. 26 spline, includes pressure plate, cover release bearing, pilot bush (or what ever it is called that goes in the end of the crank) and installation tool.
Just spent another 2hours messing about with my clutch system bleeding it through to no avail. Decided to take the slave cylinder off and found the pushrod to the release fork had dropped off. :mad: Sore left foot from hours of bleeding and the rod wasnt linked!
Furthur tinkering resulted in...
Ok , let me say first I claim to be no machinest but I do know just enough to get me in or sometimes out of trouble :D
I've been working on a customers 32 ford, and it was time to set up the clutch and brake pedal assembly, along with locating both masters.
So I thought I should post...
Went for a spin the other day in my Moggie but the clutch pedal hit the floor when I fired her up, grrr.
Im running Rover SD1 V8 running gear and manual box. The slave was standard SD1 fitment & I purchased an SD1 kit to fit the master, but its totally different to what ive physically got...
not very hotrod i know but is anyone familiar with them ??
just been to look at a soft top 900 turbo thats been stored for a couple of years,
took along a new battery and she fired up almost instantly and sounded sweet
when I pushed the clutch pedal down it stayed down !! had another...
Zoom complete clutch kit including pilot bush and installation tool. 26 spline 10.4". Taken out of packaging and matched up to flywheel to realise I had the wrong one....
Hitachi Mini starter including bolts and shims. Straight bolt pattern does both 153 and 168 flywheel/flexplate. Has...