cylinder

can anyone help with what these brake shoes & wheel cylinder might be from please.

Looking for a good cylinder head for a 1954 G.M.C pickup will possible go for the whole engine, but the casting number (on head) will be 2194819 its for a 248 engine 6cyl or anybody know where we could get one from over here. Thanks

Justed helped a mate out today and removed the cylinder head off his 1954 G.M.C pick up due to it being cracked (straight six), now on closer inspection we found that the crack has already been stapled and looks like very small pins filled the gap as well, now the question is can this some how...

I have SBC aluminium heads which may or not may not be Dart. Various casting marks are W NH 1-037 A18 95 Any ideas please?

I have been trying to find out what vehicle a master cylinder/ booster was fitted to... its a LOCKHEED 3212 846C 7/8 bore any one got any ideas where i might find out?? been searching online for ages with no luck :( thanks in advance gez

Hi Guys, went to Wheels day and bought a brand new master cylinder BUT in error.... So, if anyone out there needs a brand new Ford Mustang brake master cylinder (#F85365) and still wrapped. Will fit 65 to 73 Mustangs and apparantly can be used as an upgrade for 64 to 66s. Asking £65 ono...

Hi Guys, went to Wheels day this morning and bought a brand new master cylinder BUT in error.... So, if anyone out there needs a brand new Ford brake master cylinder (#F85365) and still wrapped. Will fit 65 to 73 Mustangs and apparantly can be used as an upgrade for 64 to 66s. Asking £65 same as...

Ey up guys has anyone got access to pictures showing a jag master cylinder fitted to a yank pickup? i am putting jaguar running gear on my 59 chevy apache. seemed to make sense to put the matching cylinder and boosterwith pedal box in there. it would be handy to see how somebody else has done it...

Nice pair of SBC 1971/72 Gen 2 Z28 cylinder heads, complete as taken off the engine... £60.00 Collect West Sussex [email protected]

I,m after a Mk2 Cortina clutch slave cylinder,can anyone help?

Hi, Help, MOT failure The cylinders on my axle need replacing, either completely or with a repair kit, can anyone help me locate these in the UK ? Cheers Barrie

Help!!! I have a Danchuk style master cylinder/booster assembly in bits and appear to be missing some kind of seal between the master cylinder and booster, see pic, I know there are a few tri chevy projects on the go out there, just hoping someone may have one laying around and be able to post a...

I have a pair of Lockheed wheel cylinders that have the part no. APTEC WAP.890 & 621700 on the boxes,and have been unable to identify them, if anyone can tell me what they fit,it might be the difference between e-bay & the bin! cheers, Gary. PS i've tried Google with no joy.

I have a matching pair of SBC early 350ci cylinder heads, came off a running engine, vgc & complete .... just need a clean up. Head Cast No 3998991 £100.00 Consider deal for decent aftermarket SBC alloy intake. Collect sussex area.

Hi all, im converting my Mustang to disc's on the rear, would i need to change the master cylinder? from what i can find out the standard dual circuit one has a bore of 1 inch and they seem to be the same throughout the Mustang range from 68 onwards, or should i fit a proportioning valve aswell...

does anyone know what had a dual master cylinder to do clutch & brake in one i've seen them somewhere but cant remember where cheers in advance Guy

good used wanted, cheers punk

Went for a spin the other day in my Moggie but the clutch pedal hit the floor when I fired her up, grrr. Im running Rover SD1 V8 running gear and manual box. The slave was standard SD1 fitment & I purchased an SD1 kit to fit the master, but its totally different to what ive physically got...

5/8 Girling M/C looks new, works fine (pressure tested at work...) but ali cap is slightly dented £20.00. Mk1 Consul radiator, will need recoring, but ok as a pattern/mockup rad £10.00. Can be sent out, or collected at the Northern Swap Meet... Reply on here, or PM me...!!! :tup:

new unused servo, but used master cylinder, had new seals and stuff about a year ago but has not been used! Has been stored in my garage :) I'm in birmingham, how does £30 sound? thanks, tom.