I have a Holley 4160 with the throttle cable roughly pinched onto the carbs throttle arm by a bolt and 2 washers. Not very nice and has no freedom of movement.
I have been trying to source a simple cable end pivot arm with a small pinch screw for the cable but I have had no joy :(...
After nine(!!!!) years of ownership, my '60 Impala went to a new home today down in Cornwall. Absolutely gutted, but its gone to a good home. Won't be replacing it just yet, but the moneys in MY bank account, not a joint one, so at least it won't be turned into some item of furniture....
Been having fun in my truck this weekend but have noticed the rear wheels are hitting the arch and rubbing with nothing in the bed!
Its My 55 F100 which already had some sort of leaf springs on it(not F100). I flipped axle on the springs to lower it which leaves 2" between tire and arch, but...
Spotted a Consul/Zodiac being trailered through West End village today ( Southampton ) ,was being towed by white Transit van,it was Black or Dark Blue high riding with Jag IRS ,no doors fitted ,just sold or some one in area just purchased ?
End of a prop with a billet end with slider for a TH350 and i think fit a glide but check first. Very strong as can imagine. £40 no offers. 07792746357 Can take to sawp meet, But im leaving sat around 3pm so must know before hand. Thanks Adam.
Does anyone have a mould we can borrow/hire/buy or a glass front end!
Will collect over weekend if possible!
Please call Stewart 07973 400245
Sorry to post here, Milt also posted in wanted below!
Not for me , a mate has just bought a '49 F1 thats had a bit of a frontal remodelling using a Volvo with a blind driver , hence it needs some panels and things . If you can help then reply on here and I'll pass your details on to him .
Parts needed include ;
Both front wings
Some used but good Cortina front end stuff:
hubs with disks redrilled 5 on 5" couple of studs missing £40
Calipers with pads and stainless braided flexis £20
Top and botom wishbones with ball joints and the long bolts £30
Crossmember £15 ( as cut out of a Dooster)