Rods 'n' Sods - UK Hot Rod & Street Rod Forums banner
ignition
1-9 of 9 Results
  1. Tech Discussion
    Does anyone have a diagram or detailled advice on how to do this? Engine and ignition are from 2 litre Sierra and the module is flat black bakelite on an ally heatsink, it's a Motorcraft item with 6 pins. It's labelled 83BB 12A199 B3A. I never had the plug that goes with it so I made one up...
  2. Tech Discussion
    hello all i pulled the dash clocks from my mk2 consul today to find the wire from the ignition switch to the coil is cooked , does anyone know what awg gauge it is or to replace it with (little voice in my head says 12 awg ?) im lucky no other wires cooked...
  3. Tech Discussion
    Hi, got a 1 wire alternator to wire up, googled it and discovered that they don't have a 'dash light' igntion on facility!? Is that right? I got the alt by default, so will have to get over the dash light glitch. I do have an ammeter dial in car so will have an idea of charge etc. So does that...
  4. Tech Discussion
    Please help someone. I have a 1966 327 Chevy Caprice with a HEI dizzy. Why does the ignition light stay on and the engine continue running (not in the pre-ignition sense) when I turn the engine off and removed the key. The problems intermitant and driving me mad. I've replaced the ignition...
  5. Tech Discussion
    My mate has just given me 2 rover distributors for my v8 they are both 35d .now one has just got 2 wires that I take go to the coil. the other one has a flat box with 4 wires going in one end 2 wires coming out the same end.it has lucas AAU 3988 marked on it is it an amp ? it has 3 terminals at...
  6. Tech Discussion
    who or where does an ignition kit for rover v8s.just something simple(I can cope with simple). my points are really pissing me off.tried wilco, cragmay,a t johnson.even went to halfords and they all say nooooo! cheers.
  7. Stuff - WANTED
    Hi, I`ve lost my spark ! !. . .well it comes and goes when it feels like it so, after working through the process of elimination I`m now looking for an electronic ign. amplifier, it`s a black box approx. 4" x 2" and screws to the inner wing or bulkhead away from the coil, it has a 3 wire...
  8. Stuff - WANTED
    im looking for a ignition barrel for a caprice column its held in buy a sprung loaded button on its end not the screw in type
  9. Tech Discussion
    I am going to need a new ignition system for my car (street car) this will be a breakerless dizzy but not hei what are the benifits of these high power coils if any for a road car ? As looking at the summit racing catalouge there is plenty of different systems avalable. Im looking for a good...
1-9 of 9 Results
Top