im in the process of importing a 39 chevy coupe and will be looking to sort indicators / lights etc to comply in uk, any ideas ie halogen bulbs, cool looking indicators etc would be appreciated, cheers
Got a problem with the brake master cylinder on my MK2 Transit.
Fluid overflows from the resevoirs and stays full to the very top, it was replaced just over a year ago with this new one because of too much pedal travel and it cured that problem but recently the resevoirs started overflowing. the...
Trying to gain a bit of room we had to back the booster into the firewall and needed some room yet in the inner fender well. This can be done for other components as well.
After mounting the booster to the firewall I mapped out my cut out area for the booster to be able to be removed...
I have been trying to find out what vehicle a master cylinder/ booster was fitted to... its a LOCKHEED 3212 846C 7/8 bore
any one got any ideas where i might find out??
been searching online for ages with no luck :(
thanks in advance
Hi Guys, went to Wheels day and bought a brand new master cylinder BUT in error.... So, if anyone out there needs a brand new Ford Mustang brake master cylinder (#F85365) and still wrapped. Will fit 65 to 73 Mustangs and apparantly can be used as an upgrade for 64 to 66s. Asking £65 ono...
Hi Guys, went to Wheels day this morning and bought a brand new master cylinder BUT in error.... So, if anyone out there needs a brand new Ford brake master cylinder (#F85365) and still wrapped. Will fit 65 to 73 Mustangs and apparantly can be used as an upgrade for 64 to 66s. Asking £65 same as...
Ey up guys
has anyone got access to pictures showing a jag master cylinder fitted to a yank pickup?
i am putting jaguar running gear on my 59 chevy apache.
seemed to make sense to put the matching cylinder and boosterwith pedal box in there.
it would be handy to see how somebody else has done it...
x3 bought for project but never used so in as new condition! (bit dusty been on shelf!)
All 3 come with new Reservoir pots
75pounds posted in the UK!
Can email pics if you pm your email
I've got this brake master cylinder fitted to my 55,but i can't find any markings on it.
I need to replace it as a couple of times I've lost the brake peddle,pump it again and all's ok,got no air in the system and still got fluid,so guess it's bypassing now and then.
Thanks for any help :tup...
Help!!! I have a Danchuk style master cylinder/booster assembly in bits and appear to be missing some kind of seal between the master cylinder and booster, see pic, I know there are a few tri chevy projects on the go out there, just hoping someone may have one laying around and be able to post a...
What i need to know is will a sigle 3/4 master clyinder be big enough for the folowing brake calipers ? Wilwood Dynalite 4 pots that have 4 x 1.380 diameter pistons and a pair of Citreon xantia front calipers these are the same as the Citreon BX that will be used for rear as they have the built...
Hi all, im converting my Mustang to disc's on the rear, would i need to change the master cylinder? from what i can find out the standard dual circuit one has a bore of 1 inch and they seem to be the same throughout the Mustang range from 68 onwards, or should i fit a proportioning valve aswell...
Went for a spin the other day in my Moggie but the clutch pedal hit the floor when I fired her up, grrr.
Im running Rover SD1 V8 running gear and manual box. The slave was standard SD1 fitment & I purchased an SD1 kit to fit the master, but its totally different to what ive physically got...
5/8 Girling M/C looks new, works fine (pressure tested at work...) but ali cap is slightly dented £20.00.
Mk1 Consul radiator, will need recoring, but ok as a pattern/mockup rad £10.00.
Can be sent out, or collected at the Northern Swap Meet...
Reply on here, or PM me...!!!