They were rusty when i got them, but i have bead blasted them and greased 'em up.:P
As a result, they are a bit pitted around the bearing surfaces, but perfectly ok to use.
£50 plus post at cost via DHL.:tup:
having just sold my 50 mercury to loon on this forum i thought id post some pics of my bullitt pair plus my two lane 55 chevy,.,,.the mustang is a 347 ally headed stroker with a tremec 5 speed.,.,rack.,n.,pinion steering,..The charger is a 383 car now running a 440 out of a jenson,,as most of...
Rare opportunity :smoke:sought after vintage cal custom 40-40 scoops [pair] with necks about 45 years old chrome show ages need rechrome come with adaptor carbs neck suit holley edelbrock 5 1/8th carbs and adaptor suit rochester 4 1/8th neck will not split up selling pair one of coolest air...
I need a Pair of Wheel Adaptors for Volvo to 5 on 5.
In other words I need adaptors to bolt onto a Volvo axle to enable me to fit a pair of 5" PCD wheels ( Sherpa / Cresta / Rover / P100 ).
Can swap for a pair of Volvo to Chevy adaptors if you like.
Thanks very much.
Need to get one rear drum and hub for my '40 rear axle so need to sell the pair of front backing plates I have.
These are in good condition and are currently in red oxide.
One has had the holes opened slightly to fit '32 spindles.
£70 the pair. Collection from J26/M25 Waltham Abbey...
Yup a FREE pair of Pop seats, one is unmolested, the other has no cover/foam and has been narrowed by about 4 inches, must be of use to someone...???
Collect from Leicester, or lets talk about moving them to near where you are...???
I've sourced a set of 600 x 16 tyres for the front so now need a pair of 750 x 16 for the rear.
I only need them so I can get my chassis rolling so bald is not an issue
Once the car is all setup and ready for re-build/paint I will go and get new all round.