Rods 'n' Sods - UK Hot Rod & Street Rod Forums banner
pcd
1-20 of 22 Results
  1. Tech Discussion
    hi all i got a morris minor with a standard 4" 102mm pcd spacing hub (with the bearings in it ) just wondering is there any other car with the same fitting and size but with 108mm pcd (4stud) as i was gonna weld mine up and retap but its cast so weld dont go if im correct thanks
  2. Stuff - FOR SALE
    2x 6x14 with good tyres + 2 x 8.5x15 could do with one tyre replaced these are off my 69 mach 1 pic below £350 pick up only. tyre sizes are 235x60x14 fronts and 245x60x15 rears
  3. Tech Discussion
    Remember seeing a link to a really handy page that listed the PCD's of various makes of car , can't remember if it was on here or elsewhere , but I'll be buggered if I can find it now ! Anyone help me out ? FYI , I need to know the sizes for a '69 Ford Econoline 9" and a similar age Plymouth...
  4. Stuff - WANTED
    Looking for a set of wheels, with or without tyres for my Volvo Amazon Estate surf project, so could be immaculate or a bit ratty. Ideally American Racing Torque Thrust, 17" x 7" with 0 offset & Mustang stud spacing. Otherwise WHY? Rocket 5 Spokes? Cragars? American Racing? Anything a bit...
  5. Freebies
    Are these of any use to anyone? Just trying to create a little space in the workshop! 4x100, look VW to me. One has a light ding in the lip but it will come out. Ideal for rolling round the workshop. One tyre holds air, the other doesn't. Both not fit for use on the road though. Free to...
  6. Stuff - WANTED
    Looking for a pair of 10x15 Torq-Thrusts to suit 5" pcd but any 5-bolt pattern considered. 8.5x15 or 10x15 Slots or 5-spoke mags also considered. Anything out there?
  7. Stuff - FOR SALE
    Hi all, I have a Brand New PAIR of Alloy Spacers & Extension Bolts for sale. They are 32mm Wide, and the PCd is 5 x 127mm or 5". Never been on a Car, still in Original Box. Thread Size is 7/16" unf. I bought them 3/4 Years ago for a Project with a Rover SD1 Rear Axle Fitted, and I know that...
  8. Stuff - WANTED
    zzc window winders 5 x 5 pcd wheels about 8" wide , caddy maybe ??
  9. Tech Discussion
    Could anyone tell me the pcd for a bedford cf Is it 5 x 6 ? Do wheels interchange with ANYTHING else
  10. Stuff - WANTED
    hi all i want some wheels for my pontiac, i would like some 8" rear wheels 7x15 front. the rears must be deep dish. i do have some 5 spoke et fronts so if you can match them for the rears it would be spiffing:tup: send pic & price please cheers rik.:tup: ps i will be going to...
  11. Stuff - FOR SALE
    4 alloy 5 spoke wheels and tyres. PCD 5 x 4.1/2" All 7 x 15", 2 fitted with Yokohama 205-50-15, 1 fitted with Uniroyal 205-60-15, 1 fitted with Westlake 205-60-15. All tyres have 5-6mm There is minor kerb damage on 3 of the rims, all easily repairable I should think. 2nd photo show the...
  12. Stuff - WANTED
    Lookng for pair /set of 4 slot mags for my scimitar. Im mainly looking for 2 wheels but if 4 come up will probably take em. Im not looking for really wide ones, about 5/6 by 14s is fine.
  13. Stuff - WANTED
    Slot mags wanted to fit Scimitar/Mgb PCD 14/15 inch diameter preferably at least 8 inches wide.
  14. Tech Discussion
    Anyone know the PCD for U S Ford 5 stud wheels of the top of there head? Cheers
  15. Freebies
    Hi All, FIRST OFF THESE NEED TO BE COLLECTED FROM HUNTINGDON CAMBS. In fairness to everybody/anybody if you are interested in these wheels please reply on this thread in the first instance (1st come 1st served basis) if you have any Qs my phone number is at the bottom. These have only been...
  16. Stuff - WANTED
    Looking for some halibrand /similar wheels to fit ford 4.5pcd,ideally 15"x8 and 15"x6.Thanks for your help regards Chris
  17. Stuff - WANTED
    wanted set of four 5 on 5 pcd steels 15 inch diameter cheers :tup:
  18. Vehicles - WANTED
    looking for a pair of narrow fronts 4 - 5 " -15" dia steels or alloys ,yes stud pattern is volvo,or volvo - ford or chevy pcd adapters , i can get new on ebay for £190 but this is more of a budget build ,many thanks vin
  19. Traders - For Sale / Services - CLOSED
    Here I have a little product that I hope you guys will like. PCD Checkers, for identifying wheels at breakers, swap meats and auto-jumbles, there are four available, to check metric and imperial, four and five stud PCDs. Metric Four Stud, 4x98, 4x100, 4x108, 4x114.3 & 4x130. Imperial Four...
1-20 of 22 Results
Top