Rods 'n' Sods - UK Hot Rod & Street Rod Forums banner
1 - 18 of 18 Posts

·
Full Time Metal Junkie
Joined
·
248 Posts
Discussion Starter · #1 ·
Hi Guys
It's been a while since I've added some content, so this will help sum up some of the work we have completed on the 35 Willys. Some of the content may be a duplicate but I looke3d threw my previous post and could not find what I will post now.

Recap:
Started out by making some flexible patterns of the rear quarter panels



After which I started laying out a panel.



Shrinking the edge with a set of thumb nail dies to get the edge to roll over and raise the top.



After which stretching the top area .



And smoothing out the walnuts it starts to take shape.



And some fast forward shaping.



Now the left side was just a reverse of the right side.



Now the left side was just a reverse of the right side.

 

·
Full Time Metal Junkie
Joined
·
248 Posts
Discussion Starter · #5 ·
Near a finish product











Well today I got some reveals set in the right side inner well.





Here it's cut to fit the shape of the frame rail..



And this is the inside view....



Some Up dates on the inner wells

I started putting the tops on the inner panels







This is going to help stabilize the outer body panels.

 

·
Registered
Joined
·
5,698 Posts
I want to be able to do the second post but without the special tools, is it possible???

post #2
 
1 - 18 of 18 Posts
Top