Rods 'n' Sods - UK Hot Rod & Street Rod Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
267 Posts
Pop gauges work fine on 12V. Swap the bulbs to 12V ones and the fuel gauge will read full until there's about 1/4 left, when it drops quite quickly. Put a resistor inline with the fuel gauge and it's a lot more progressive.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top