Rods 'n' Sods - UK Hot Rod & Street Rod Forums banner
1 - 9 of 9 Posts

·
Heavy Oiler
Joined
·
2,504 Posts
Vortec heads (copies)
You would need different inlet manifold if running on early (pre vortec) SBC
 

·
"call 0-800 Apocalypse"
Joined
·
5,229 Posts
Discussion Starter · #3 ·
Vortec heads (copies)
You would need different inlet manifold if running on early (pre vortec) SBC
i thought vortecs were all center bolt col, i knew about the angled manifold bolts, they seem to have the undrilled bulges for perimeter bolt rocker covers, is this common to all vortec heads, i readily admit to not knowing much at all about later GM stuff.
 

·
Heavy Oiler
Joined
·
2,504 Posts
These are not made by GM (can you see the CF or maybe GF logo?) hence no GM casting numbers.
You can see the bolt holes drilled for centre rocker box bolts both visible in forth pic.
No idea who makes them, or how good they are.
 

·
"call 0-800 Apocalypse"
Joined
·
5,229 Posts
Discussion Starter · #5 ·
These are not made by GM (can you see the CF or maybe GF logo?) hence no GM casting numbers.
You can see the bolt holes drilled for centre rocker box bolts both visible in forth pic.
No idea who makes them, or how good they are.
cheers col, mmmm, CF,,,,chinese factory perhaps,?:incheek:
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top