Rods 'n' Sods - UK Hot Rod & Street Rod Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
134 Posts
Discussion Starter · #1 ·
hi i have a su carb and a adaptor for it but i've never done any conversions like this so any advice would be appreciated

my car is a 100e with the original sidevalve engine still in it

cheers ed
 

·
I'm Not Jed Clampett
Joined
·
2,725 Posts
What size is the carb? 1 1/4" should be about right for your 100E.

I ran an E93A motor with a single 1 1/4" SU (off an 850 mini) for a long time, it worked very well and the mini's needle and spring was about right too.
 

·
Registered
Joined
·
134 Posts
Discussion Starter · #3 ·
i think it is a 1 1/4 got it from a friend so dont know what it is from have people used the standard throttle linkage or converted it to cable
 

·
Registered
Joined
·
3,481 Posts
i think it is a 1 1/4 got it from a friend so dont know what it is from have people used the standard throttle linkage or converted it to cable
Don't know about 100e as I havn't looked under the bonnet of a standard one for years but when I converted my Zodiac to SUs I adapted the standard linkage to fit the SU carbs.
 
1 - 4 of 4 Posts
Top