Rods 'n' Sods - UK Hot Rod & Street Rod Forums banner
1 - 8 of 8 Posts

·
Registered
Joined
·
1,421 Posts
Discussion Starter · #1 ·
looking for someone who repairs or sells Rams that will fit my 53 plymouths folding roof machanism, as one of mine has bent,( a lot ), Thanks.
 

·
Registered
Joined
·
101 Posts
looking for someone who repairs or sells Rams that will fit my 53 plymouths folding roof machanism, as one of mine has bent,( a lot ), Thanks.
If I think you are referring to a 12 volt "linear actuator", then there is a possibility (due to the USA connection) the unit may be by Warner Electric (USA engineering company with no connections to the film industry!), although a photo would be handy as there may have been some copy-cat ones made then.
I used to be the "go-to" applications-engineer (for the UK) back in the '80's, and what I didn't know was........
Warner Electric were taken over by Dana (yes the axle people!) in the '90's but there is a Warner dealer in the Herts/Beds area setup by a colleague and is now run by his son and they rebuild/replace Warner stuff. I'll try and dig out the name and contact details.
 
1 - 8 of 8 Posts
Top