Rods 'n' Sods - UK Hot Rod & Street Rod Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
hiya guys i,m after a bit of advice,i,m fitting a 2.0 litre twin cam sierra engine in my moggy.i have the loom and ecu but does anyone know if i need anything else(the engine is comlete with coil paks)thanks in advance
 

·
Heavy Oiler
Joined
·
2,504 Posts
Not sure but you may need the Ign key and receiver around the ignition barrel for the imobiliser to work.
 

·
Off the Xmas card list
Joined
·
24,138 Posts
hiya guys i,m after a bit of advice,i,m fitting a 2.0 litre twin cam sierra engine in my moggy.i have the loom and ecu but does anyone know if i need anything else(the engine is comlete with coil paks)thanks in advance
MAP sensor ( small black plastic thin box ) with vacuum feed and potentiometer ( small black thing with a screw adjustement )
 
1 - 6 of 6 Posts
Top