Rods 'n' Sods - UK Hot Rod & Street Rod Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
365 Posts
Discussion Starter · #1 ·
i need your help.i am in process off painting bonnet which didnt look to bad.i flatted it back and put a coat of primmer on it when i noticed loads of tiny cracks in it.so i sanded it right down and painted it againand they still come thruogh.is there a cieller i can use to fill cracks.thanks danny
 

·
Premium Member
Joined
·
3,624 Posts
A couple of coats of filler primer should cure it. You could even roll it.
Buy it from any auto paint stockist.

Jeff
 

·
Woodchipper Extraordinair
Joined
·
2,305 Posts
Upol reface polyester spray filler, comes in 1 litre tins, you'll need a gun with atleast a 2mm tip to spray it with but it should sort it out, block it back with 180 or 240 depending on prefernce then prime as per usual.

As a foot note dont try to thin it and when you come to clean your gun use acetone as it has some sort of weird reaction with thinners.
 

·
fixin your car
Joined
·
935 Posts
and it is like a sponge so dont get it wet
 
1 - 4 of 4 Posts
Top