Rods 'n' Sods - UK Hot Rod & Street Rod Forums banner
1 - 11 of 11 Posts

·
Administrator
Joined
·
14,116 Posts
Discussion Starter · #1 ·
ok i have a new hei dizzy
BUT when pulling the gearbox off the engine fell off the jack and the cap hit the bulkhead and smashed it

so i got a new cap and rotor arm but now i have no spark at the plugs
the cap has the coil built in to it

how to i find the fault please
 

·
Premium Member
Joined
·
3,386 Posts
Darren , I've always used hei and swear by them. When I fitted my new engine I took a fully functioning hei out, put it in and it didn't work ??? I had loads of old second hand parts so swopped them over none worked and it seemed like all the bits that had sat around or were disturbed didn't work, in the end I bought a new one from Real Steal. Try this as the coil is the old part you may have a duff coil now ?
https://www.google.co.uk/url?sa=t&s...twIwAQ&usg=AFQjCNEzChYPCBRp7lIhbKk502YoLu29BA
 

·
Administrator
Joined
·
14,116 Posts
Discussion Starter · #9 ·
well its fucked

i followed the video and the coil seemed to be faulty so i borrowed a coil and put it on
30 seconds later that went fizz
so now what
i have 12.4v dc and a great earth
the alternator is not connected so there is no increased voltage
 
1 - 11 of 11 Posts
Top