Rods 'n' Sods - UK Hot Rod & Street Rod Forums banner
1 - 3 of 3 Posts

·
ready salted
Joined
·
1,817 Posts
Discussion Starter · #1 ·
Does anyone know what the law is regarding fitting a rock & roll bed into a van? there are several on the market that are push/pull tested & are M1 certificated & sell for quite strong money. Others look equally as strong but haven't a test certificate. Is it illegal to retro fit un-certificated seats into a van, even if it is bolted to the van floor & has seat belts fitted? Also would it affect insurance? I'm contemplating making my own to be a bespoke fit, but don't want to fall foul of any laws
thanks in advance

cheers...Nige
 

·
Old Rod Old Sod!
Joined
·
329 Posts
If not fitted properly then will fail MOT, the R&R one you see advertised are only good if they have been crash tested, a lot have not. I made up a R&R for my T4 but never carried passengers so no problem. If you carry passengers then you want to know they are safe, if any thing was to happen.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top