Rods 'n' Sods - UK Hot Rod & Street Rod Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
86 Posts
Discussion Starter · #1 ·
SEALEY SUPERMIG 150/5 MIG WELDER
Welding current 30-150A

A forced air cooling system to slow transformer heating and increase duty cycle

It has a good non-live torch to prevent accidently striking an arc

It has speed control for the wire feed and ampage control

Chain on the back for securing your gas bottle and rear gas inlet spout.hose and regulator can be used with C02, Argon or a mix of the two.
NO BOTTLE!
was used to fabricate a chassis and not used since. as there is no bottle to test with, it will have to be 'sold as seen' so priced to suit at £50.00
Collection only or can be taken to the HRD's
FREE!
Bare Viva HA crossmember, surface rust. collect only or can be taken to HRD's

Both Items near Chichester

Tony
 

·
Premium Member
Joined
·
990 Posts
can you put me down for the ha xmember pls m8 , can collect at the hotrod drags , ta . pm me your phone no so i can ring you there . cheers,paul ...
 

·
Registered
Joined
·
86 Posts
Discussion Starter · #4 ·
taken, mig welder

SEALEY SUPERMIG 150/5 MIG WELDER
Welding current 30-150A

A forced air cooling system to slow transformer heating and increase duty cycle

It has a good non-live torch to prevent accidently striking an arc

It has speed control for the wire feed and ampage control

Chain on the back for securing your gas bottle and rear gas inlet spout.hose and regulator can be used with C02, Argon or a mix of the two.
NO BOTTLE!
was used to fabricate a chassis and not used since. as there is no bottle to test with, it will have to be 'sold as seen' so priced to suit at £50.00
Collection only or can be taken to the HRD's
FREE!
Bare Viva HA crossmember, surface rust. collect only or can be taken to HRD's

Both Items near Chichester

Tony
Mig welder sold
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top