Rods 'n' Sods - UK Hot Rod & Street Rod Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
340 Posts
Discussion Starter · #1 · (Edited)
New DART SBC alum heads 180 & 200 cc runners 2.02 & 1.60 valves

• A356-T6 aluminum alloy
• Bolt on compatibility: Standard valve angle and spacing are retained to allow use of off the shelf pistons and valve train components
• Multi-angle intake seats and radiused exhaust seats dramatically increase air/fuel flow
• Hardened exhaust seats are compatible with unleaded gasoline
• Manganese bronze valve guides extend cylinder head life
• Machined for 1.250 or 1.437 diameter valve springs
• Straight spark plug configuration
PRICE 620 a pair to your door UK :smoke:

Regards Daryl

/B]
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top