Rods 'n' Sods - UK Hot Rod & Street Rod Forums banner
1 - 3 of 3 Posts

·
Dragging not Bragging
Joined
·
5,720 Posts
Discussion Starter · #1 ·
At which height should the rad be mounted ........ The cap is on the rad should that be higher than the thermostat housing or would it be ok to mount it lower but have a remote filler at the stat housing
 

·
Off the Xmas card list
Joined
·
24,496 Posts
The best position is the cap a minimum of a 2 hoses thickness above the stat .( leaves room for expansion within the tank ). If you mount the rad lower then you will need a filler plug on the rad plus an expansion pipe linked up to overflow tank , with staggered pipe heights within it , and back to 'stat filler neck.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top