Hi all, I'm restarting a 32 model B roadster project, I plan to make it comply with the VHRA rules, Crossplys and buggy springs, I have a 350 chevy engine with a TH 350 that came out of a Suburban I want to use a T5 gearbox from a C10, what flywheel, bell housing and throw out arm do I need? If anybody has any of these parts let me know. The TH350 is surplus to requirements.
wingedeelfingerling
did you mean the t5 was from an s10 rather than a c10? if so what engine did the s10 have? if it was the 4.3 v6 then that box will bolt straight up to a 350 as the 4.3 is just 3/4 of a 350. of course if it was a c10 it could also have had a 4.3 so the same applies.
neil.
neil.
so it has no bellhousing with it? if it has then pics showing the bolt pattern where it bolts to the engine would help. 
neil.
neil.
This post has been deleted
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
