Rods 'n' Sods - UK Hot Rod & Street Rod Forums banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
2,484 Posts
On the steering shafts I do I normally face both ends and chamfer then drill and tap either 6 or 8 mm thread and put a piece of studding in the middle nip up tight then weld . Never had a problem.
Or take Wayne up on his offer
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top