Rods 'n' Sods - UK Hot Rod & Street Rod Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,228 Posts
Discussion Starter · #1 ·
Hi Folks
Just run out of my usual 2K activator and need to paint some parts this afternoon
I do have some old House of Colour Kosmic Kolor Urethane enamel catalist
One tin is KU-100, one Tin his KU-150

Are these OK to use and what's the difference between 100 and 150?

Please let me know ASAP if you can help

Cheers
Al
 

·
Premium Member
Joined
·
4,207 Posts
If this is a show quality job i would recommend leaving it till you have the right stuff, but if its engine bay, door shuts, small part stuff you should be OK Al, HoK is 2;1,1 you might need to adjust depending on the lacquer youre using. As i understand it the difference in KU 100/KU 150 is the later is medium solids, so will have less flow, you can up the thinners a bit to help it along, Bry
 
1 - 3 of 3 Posts
Top