Rods 'n' Sods - UK Hot Rod & Street Rod Forums banner

1 - 10 of 10 Posts

·
Heavy Oiler
Joined
·
2,504 Posts
Discussion Starter #5 (Edited)
Ebay removed it due to brand name misuse? £100 is what I paid for it. Offers??

 

·
Heavy Oiler
Joined
·
2,504 Posts
Discussion Starter #7
What is it? And are there any pulleys?
And yes........ I know its a blower..... I mean what make?
Any details?
No pulleys or manifold, only what you see in the photos.
It is A GMC V6-71 same as WEIAND 6 71 except the mounting is different. You would have to make / modify a manifold to fit or use it as spares if you have a 671.
Rotors and gears appear good, turns smoothly with no chips in the rotors.
If it was me, I would probably want to drop the end cases and double check before use ( but that's me!) You can get pulleys carb mounts, and alternative drive snouts, the only issue is the manifold. Cheers Col.
 

·
Exceeded sell by date
Joined
·
7,741 Posts
Don't wish to interfere but hopefully it may help. I have a 6v71 set up going on my small block Ford. Nigel at UK Blowers can make the manifold set up for these and also supply anything else that is necessary, pulleys, snouts, belts etc. They have a different mounting to a 6/71 because their original use was to sit within a V engine. There are a number of people using them over here very successfully.
 

·
Registered
Joined
·
1,122 Posts
that snout looks like it would fit a ford motor real nice ,i wouldent like to tell you how much it cost meto make my snout to fit my ford motor worth every penny
 
1 - 10 of 10 Posts
Top