Rods 'n' Sods - UK Hot Rod & Street Rod Forums banner

Status
Not open for further replies.
1 - 8 of 8 Posts

·
Registered
Joined
·
357 Posts
Let me know if you get this I need the Transverse Spring if you don't want it
 

·
depositionist
Joined
·
184 Posts
theres an fd victor one on ebay at the mo. the only difference is where the cross member top mounts fit to the chassis, the hc has a vertical bolt & bush but the fd has a horizontal bolt with a bush in the chassis. lots of the hb / hc / fd suspenion components are the same. :tup:
 

·
Registered
Joined
·
917 Posts
Discussion Starter · #7 ·
Hi dr fusion,
Its actually for a mates project fd victor but as hes got the front wheels for it, hes found that they're gonna catch on the arch using the intended ride height, they dont make the wheels any narrower and hes found out that the later hb/ hc cradles are a little narrower than the fd one, so the plan is to modify the hc viva cradle to fit the fd body!
cheers
 
1 - 8 of 8 Posts
Status
Not open for further replies.
Top